Pulp mills and sawmills in Luxembourg

WoodComp tracks 1 sawmill in Luxembourg, with capacity, status and location as open data. Luxembourg holds 88 700 ha of forest, 34 % of its land area, led by Beech and Oak. The fibre balance below sets their estimated wood demand against the national removals.

Wood supply

Forest area: 88 700 ha; 34 % of land area
Standing volume: 36 M m3; growing stock, over bark
Yearly increment: 819 1000 m3/y; net annual increment (FAWS), over bark
Fellings: 328 1000 m3/y; 40 % of yearly increment
Industrial roundwood: 229 1000 m3/y; production

Forest types

share of forest area

Naturally regenerating 66.2 % · 58 700 ha
Other planted 33.8 % · 30 000 ha

Tree species

share of growing stock

Beech 30.0 %
Oak 26.1 %
Spruce 21.2 %
Birch 2.5 %
Pine 2.3 %
Other species 17.9 %

All 7 reported species

Beech30.0 %9 M m3Fagus sylvatica
Oak26.1 %8 M m3Quercus spp.
Spruce21.2 %7 M m3furnish of 1 local facilityPicea spp.
Birch2.5 %1 M m3Betula spp.
Pine2.3 %1 M m3Pinus spp.
Ash1.7 %1 M m3Fraxinus spp.
Maple1.3 %0 M m3Acer spp.

The facilities on this page report Douglas Fir (1) and Spruce (1) as furnish. The species matching that demand hold 21.2 % of the growing stock. Removals by species are not reported internationally, so this is a comparison of demand and standing forest, not a balance.

Fibre balance

betaestimated industry demand vs reported removals

Estimate. The demand side covers only the facilities WoodComp has mapped, at reported capacity, converted with published factors. Removals are official statistics.

Sawlogs

Removals0.1 M m3/y0 coniferous, 0 non-coniferous

Estimated sawmill intake~0 M m3/y88 % of removals, from 1 of 1 operating sawmills

Pulp fibre

Pulpwood removals0.1 M m3/y0 coniferous, 0 non-coniferous

Sawmill chips, estimated0-0 M m3/y30-40 % of sawlog removals, joins the pulp fibre supply

Estimated pulp-mill wood demandno reported capacity figures yet (0 operating pulp mills)

Demand is derived at render time from reported capacities and the published factor table: sawn output at 2.0 m3 of log per m3 sawn, pulp at 2.3 to 5.3 m3 per tonne depending on process and furnish. Sawmill chips are estimated at 30 to 40 percent of sawlog removals (FAO conversion factor material balances) and shown as their own supply component, never merged with the removals. Log imports and exports are not modelled, and demand above the estimated supply can mean either imports or capacity above actual production. Where coverage is low the balance measures our dataset, not the market.

Forest, species and production figures: FAO FRA 2025 and FAOSTAT (2024-2025). Increment and fellings: Eurostat European Forest Accounts (2023), forest available for wood supply, over bark. Removals by assortment: Eurostat roundwood removals (2023), under bark.

Pulp mills: 0
Sawmills: 1
Operating: 1
Operating pulp capacity: 0
Sawn timber capacity: -

Sawn timber capacity covers 0 of 1 operating sawmills with a reported figure. Data last updated 2026-09-13.

Loading map…

Report a missing millKnow a mill we have not listed?

Mill	Raw material	Status	Capacity
Bois Brever (Huldange)SawmillBois Brever S.A.	Softwood	Operating	23 000 m3/y sawn timberestimated from 45 000 m3/y log intake

How to cite

WoodComp (). Pulp mills and sawmills in Luxembourg. WoodComp facility database, version 2026-09. Accessed the date you retrieved it. https://woodcomp.world/countries/luxembourg